FFA-8004 HD four channel amplifier
The FFA-8004 HD is high performance four channel power amplifier, ideally suited for use with premium cinema sound systems.
The mechanics are built to the same exacting standards as FFA’s professional live sound and night venue products.
The FFA-8004 HD features a new silent cooling system so can be installed where equipment noise would normally cause a nuisance.. These class D amplifiers use highly efficient electronic technology to run cool and use less mains supply power. The precision analogue circuits give a very stable sound stage with excellent signal to noise ratio. The sound experience is wholly musical and natural which will enhance the cinematic performance.Designed and made in England with a 6 year warranty.
Features at a glance
FFA-8004 HD:
4 x 2000W ref 4 Ohms, 4 x 1000W ref 8 Ohms
Suitable Applications
Any sound system that is required to deliver best audio performance
Long term power delivery in any environment
Home residential cinemas
Professional test screening rooms
Commercial cinemas
Live theatre sound
Conference rooms
AV systems
Night venues
Cruise ships
Full Fat Audio FFA-8004 HD Power Amplifier
Power
Ratings
FFA-2004 HD:
4 x 500W ref 4 Ohms, 4 x 250W 8 Ohm 4 x 1000W ref 2 Ohms
FFA-8004 HD:4 x 2000W ref 4 Ohms, 4 x 1000W ref 8 Ohms
Note: Channel pairs can be bridged to drive very high power 8 Ohm subwoofersGain FFA-2004 HD – 20dB FFA-8004 HD -28dB THD THD+N Typical 0.05 4% Ohm 1kHz Frequency
Response
20Hz - 20kHz +- 0.5dB Controls 40 Point Potentiometer per channel, power on switch Indicators signal green = -20dB, signal yellow = -3dB, red signal = clip, signal red protect = over current, low AC mains or 3 sec. mute on power up Load
Protection
DC on output, precision clip limiter circuit Amplifier
Protection
Short circuit, current overload, thermal shutdown, high frequency stability circuit Audio Signal
Inputs
Balanced Neutrik® Female XLR input connected Pin 1 - GND, Pin 2 - Hot +, Pin 3 - Cold - . Audio Power
Outputs
Neutrik® speakON each channel. Channels 1 and 3 output speakON utilises 2+ and 2- connection to allow use of 4 core loudspeaker cable for bi amp loudspeaker system. Bridged output Power
Requirement
1 x Neutrik® 20A powerCON connector 1 x 16A 230 VAC Circuit. Power range 185V-230VAC
120V (configured at factory)
System
Cooling
High CFM 80mm fan with proportional signal speed control. Rear to front airflow Dimensions 88mm Height x 483mm Width x 510mm Depth. Includes rear rack support. 19" rack mount enclosure Weight 10 kg
