Crown Audio - DCi8|300DA Eight-channel, 300W Power Amplifier with Dante™ Networked Audio, 2/4/8Ω and 70V/100V
For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.
Features
- Integrated Dante™ / AES67 Networked Audio – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
- Network Configuration, Monitoring & Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
- Programmable General Purpose Input/Output Port – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
- Digital Signal Processing – DSP capabilities include the following:
- LevelMAX Limiters
- Input/Output EQ
- Crossover
- Delay
- Matrix Router
- Speaker Line Monitoring
Crown Audio - DCi 8|300DA 8 Ch, 300W @ 4Ω Power Amplifier with Dante™
SKU: GDSDCI8300DA
£4,490.00 Regular Price
£3,279.68Sale Price
Out of Stock
- Redundant Dante ports
- Primary
- Secondary
- Will accept 48khz or 96khz
- Capable of sending out Dante audio from analog inputs pre/post processing (@ 48kHz) - Audio Architect Control and Monitoring
- DriveCore Amplifier Technology
- Universal PFC Power Supply
- DSP
- 48kHz processing
- 20 Presets
- Input router - High, medium, and low priority inputs
- Input delay up to 2s
- Input EQ
- Crossover
- Output EQ
- Output Delay up to 100ms
- LevelMAX limiter
- Load Monitoring - Pilot tone
- Normal
- Burst - Continuous Load Monitoring
- Sweep Load Monitoring
- Channel Auto-Standby
- Speaker Tunings - Aux-Port
- Sleep contact closure
- Amp Status output - Removable air filters
- Front panel LED indicators
- POWER SPECIFICATIONS
- Dual-Mode - All Channels Driven
- 2Ω: 150W
- 2Ω: 150W
- 8Ω: 300W
- 16Ω: 150W
- 70V: 300W
- 100V: 300W - Bridge Mono - All Channels Driven
- 4Ω: 300W
- 8Ω: 600W
- 16Ω: 600W
- 140V: 600W
- 200V:600W
- Redundant Dante ports
