top of page

Crown Audio - DCi4|1250N Next generation high performance installation amplifier with DriveCore technology with analogue and digital inputs

 

The new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

 

POWER RATINGS (all channels driven)

 

  • 2 Ohms 1250W
  • 4 Ohms 1250W
  • 8 Ohms 1250W
  • 70Vrms 1250W
  • 100Vrms 1250W
  • 4 Ohms Bridged 2500W
  • 8 Ohms bridged 2500W
  • 16 Ohms bridged 2500W
  • 140Vrms 2500W
  • 200Vrms 2500W

 

Features

 

ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.

 

NETWORK MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.

 

PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.

 

DIGITAL SIGNAL PROCESSING 

  • LevelMAX Limiters
  • Input/Output EQ
  • Delay
  • Matrix Mixer
  • Speaker Line Monitoring

 

TRUE RACK DENSITY – Power points of 300W or 600Win 2-/4-/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.

 

DIRECT DRIVE CONSTANT VOLTAGE – Save money by using smaller gauge wiring to drive the speakers using either 70Vrms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. 

 

CHANNEL INDEPENDENT HI-Z/LOW-Z SELECTION –Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.

 

BRIDGEABLE CHANNEL PAIRS – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.

REMOTE ON/OFF INTERFACE – Save power by integrating the amplifier into a control system so you can easily turn it on and off.

 

EFFICIENT COOLING DESIGN – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.

ADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.

Crown Audio - DCi 4|1250N 4 Ch 1250W @ 4Ω Power Amplifier with BLU Link

SKU: GDSDCI41250N
£5,050.00 Regular Price
£3,333.00Sale Price
Out of Stock
  • Frequency Response ( 8 Ohms, 20 Hz - 20 kHz) +/- 0.25 dB
    BLU Link Input Signal to Noise Ratio (A-Weighted) > 104dB
    Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz) 0.35%
    Voltage Gain 34 dB
    Damping Factor (20 Hz to 100 Hz) >1500
    Input Impedance (nominal balanced, unbalanced) 10 kOhms, 5 kOhms
    Maximum Input Level before Compression +20 dBu
    Load Impedance (Stereo/Dual Mode) 2 - 16 Ohms; 70Vrms and 100Vrms
    Load Impedance Bridge Mono 4 - 16 Ohms; 140Vrms and 200Vrms
    Cooling Continuously variable speed forced air, front to back airflow
    Maximum Fan Noise (re dBA SPL @ 1M) 47
    Required AC Mains (+/- 10%) 100V-240V ~ 50/60 Hz
    Dimensions 19" x 3.5" x 17" (48.3cm x 8.9cm x 42.5cm)
    Weight 30lbs (13.60kg)
    IEC Power Connector 20A

PRICES EXCLUDE VAT

Product Rating

average rating is 3 out of 5, based on 150 votes, Product review(s)

There are no reviews yet, be the first!

Thanks for submitting a review! 😘

Add Review

Customer Reviews

LOAD MORE

Related Products