top of page

XTA DP424 2-in 4-out Signal Processor

 

As the demands placed on professional audio systems continue to steadily increase, so must the technology be advanced to maintain the expected quality and useability. Based on a completely new processing platform, running at a native sample rate of 96kHz, the 4 Series set a new standard in terms of performance, flexibility, and ease of use.

 

Using the latest digital signal processing and high sample rates would be wasted if attention is not paid to capturing the signal as faithfully as possible, and reproducing it accurately. The range uses high-performance 24-bit converters on the inputs and outputs, running at 96kHz to give a bandwidth of over 30kHz and a dynamic range in excess of 116dB.

 

With two or four fully balanced inputs, and up to eight fully balanced outputs, it also offers greatly increased flexibility. Now it’s possible to realise (for example) four two-way monitor systems, or your favourite DP226 configuration with an additional stereo processing channel, all in a single 1U unit.

 

With multiple inputs and outputs, the 4 Series are able to offer much more than a simple crossover system. To make configuration as simple as possible, a selection of templates are available to set the system up, taking care of routing and selecting useful crossover points.

 

However all of this is easily adjustable, including the routing. Any output may be fed from any input, or combination of inputs, forming a completely flexible matrix.

 

The 4 Series processing platform has been designed to operate at a native sampling rate of 96kHz, and also be powerful enough to cope with the additional inputs and outputs. Available on each input channel is a 28 band graphic equaliser, in addition to 8 bands of fully parametric equalisation. Each output path features up to 9 parametric sections, in addition to the crossover filters which themselves now offer slopes from 6dB/Octave up to 48dB/Octave.

 

All parametric sections can be reconfigured to many alternate filter behaviours, including the familiar high and low shelves and notch filters, but along with bandpass, elliptic and variable ‘Q’ shapes, and phase adjustment, in 2 degree steps. Each output also features a combination of limiters – a limiter which is designed to protect individual drivers from over-excursion/over-driving, and an additional look-ahead “D-Max” limiter for added safety.

 

Add to this sub-millimetre accuracy when introducing time alignment with completely flexible ganging of all channels, and it can be seen that a member of the 4 Series will fit the bill in any system configuration.

 

XTA DP424 Signal Processor

SKU: GDSXTADP424
£2,069.53 Regular Price
£1,869.53Sale Price
  • Inputs
    Electronically balanced (transformers optional)
    AES/EBU (selectable) fitted as standard to all Series 4 units
    Impedance >10k ohms CMRR >65dB 50Hz – 10kHz

    Outputs
    All electronically balanced (transformers optional)
    AES/EBU fitted as standard to all Series 4 units

    Source Imp < 60ohms
    Minimum Load 600ohm
    Maximum Level +20dBm into 600 ohm load
    Sampling Rate DP428 – Up to 96kHz internal, up to 192kHz can be accepted and converted.

    Frequency Response ±0.5dB 10Hz – 32kHz
    Dynamic Range >116dB 20Hz -20kHz. Unwtd
    Distortion < 0.001% @ 1kHz, +10dBm
    Maximum Delay 650 mS. (increment 0.325 µs steps)
    Output gain Adjustable +15dB to -40dB in 0.1 dB steps and mute

    Equalisation
    Filters Parametrics – 8 Per input / 9 per output
    Additional filters 28-band graphic on each input
    Each parametric can be switched to Bandpass, Allpass, Notch, VariQ, Shelf and Elliptical response
    Phase filtering – 2 degree steps on each input and output

    Crossover Filters
    Bessel / Butterworth 6/12/18/24/48dB per octave
    and Linkwitz-Riley 12/24/48dB per octave

    Limiter
    Threshold +22dBu to -10dBu
    Attack time 0.3 to 90 milliseconds
    Release time 4, 8, 16 or 32 times the attack time

    Clip/D-max Limiter
    Look-ahead attack time, Fast, Medium or Slow release times

    Connectors
    Inputs 3 pin female XLR
    Outputs 3 pin male XLR
    RS485 In/Out XLRs
    RS232 9 Pin (Female) D Connector

    Power
    3 pin IEC
    Power 60VAC – 240VAC
    Consumption < 40 watts

     

    Weight 3.5kg. Net (5kg. Shipping)
    Size 1.75”(1U) x 19” x 12” (44 x 482 x 305mm) excluding connectors

     

    Due to continuing product improvement the above specifications are subject to change.

PRICES EXCLUDE VAT

Product Rating

average rating is 3 out of 5, based on 150 votes, Product review(s)

There are no reviews yet, be the first!

Thanks for submitting a review! 😘

Add Review

Customer Reviews

LOAD MORE

Related Products