Series amplifiers are made for Funktion One by English amplifier designers and manufacturers Full Fat Audio (FFA). The four channel DSP models; Networking, four inputs and six outputs (four via amplifier channels and two via additional signal channels) and intuitive software offer great flexibility for both live and installation. The new F20Q is useful for powering distributed systems of small loudspeakers such as the F55 or F81.


The F80Q's new electronic design makes it especially suited to powering the Evo 6 and 7 range with exceptional audio quality.

All amplifiers utilise rugged switch modulation power supplies (SMPS) with Class D Pulse Width Modulation amplifier stages.



  • High efficiency FFA Class D technology
  • DSP card (4 channel models only)
  • Rugged tour class Aluminium construction
  • Lightweight
  • Side chain TCA clip limiter
  • Signal link connectors
  • Hand built and designed in England
  • New F20Q and F80Q now available


F20Q Four Channel Amplifier:

Output power (Watts RMS) per channel

8Ω - 250W; 4Ω - 500W; 2Ω - 1000W


F40Q Four Channel Amplifier:

Output power (Watts RMS) per channel

8Ω - 600W; 4Ω - 1000W


F60Q Four Channel Amplifier:

Output power (Watts RMS) per channel

8Ω - 800W; 4Ω - 1500W


F80Q Four Channel Amplifier:

Output power (Watts RMS) per channel

8Ω - 1000W; 4Ω - 2000W


Other FFA amplifiers can be supplied on request


Technical Specifications


Gain: 32dB

THD: Typical 0.05% @ 4Ohm, 1kHz THD+N

Frequency Response: 20Hz - 20kHz ±0.5dB

Controls: 40 point potentiometer per channel, power on switch

Indicators: signal green = -20dB, signal yellow = -3dB, red signal = clip, signal red protect = over current, low AC mains or 3 sec. mute on power up

Load Protection: DC on output, side chain TCA clip limiter circuit

Amplifier Protection: Short circuit, current overload, thermal shutdown, high frequency stability circuit

Audio Signal Inputs: Balanced Neutrik® Female XLR input connected Pin 1 - GND, Pin 2 - Hot, Pin 3 - Cold, XLR Male signal throughout each channel

Audio Signal Outputs: Neutrik® speakON each channel. Channels 1 & 3 output speakON utilises 2+ and 2- connection to allow use of 4 core loudspeaker cable for bi amp loudspeaker system, for example stage monitor system.

Power Requirement: 1 x Neutrik® 20A powerCON connector, 2 x 16A 240V VAC circuit. Power range 185V-240V AC


System Cooling: High CFM 80mm fan with proportional signal speed control. Rear to front airflow.


Dimensions: 483mm x 510mm x 88mm. Includes rear rack support. 19'' rack mount enclosure

Weight: 9kg (F40Q & F60Q); 12kg (F100-2)


N.B. Please note that the F-Series amplifiers have an opposite airflow to that of the E-Series amplifiers and therefore, when used together in a rack it is advisable to place the F-Series at the top of the rack.

Funktion One F80Q G2 DSP 4 Ch Amplifier

  • Please contact us for a price on all new Funktion One products


Product Rating

“By far the best service I’ve ever experienced. I was importing a product to Canada and the whole experience was quick, easy and seamless. These guys really care about running a good business. Not to mention the price was cheaper than the stores here even after importing. Definitely will do more business in the future.” 

—  Philip Manzon

google reviews 4.9.png