EX12 - Extreme Resolution Active Speaker System

 

The EX12 further builds on the success of the EX6 and EX10 by implementing the revolutionary 3" NVPD large  format compression driver found in our flagship VHD range of products. This makes for one of the most perfectly  balanced and accurate, compact, 2-way active boxes available on the market today. Complete onboard control  courtesy of electronic crossovers, phase alignment, equalization and speaker protection are all integrated into the  EX12’s amplifier module.

 

Features

  • Professional, Baltic birch construction with wear resistant polymer coating
  • 127dB sustained output, 130dB peak with very high dynamic range and low noise floor
  • 500W of total power with complete on-board speaker management system
  • 450W high efficiency, current enhancing, switching low frequency amplifier
  • Very high quality 50W, low IM distortion, Class AB, high frequency amplifier with transformer balanced output
  • Compact asymmetrical trapezoidal design allows for use in stage monitor or under balcony applications with high pass filter to adjust equalisation and phase response
  • Wide dispersion 80° H x 40° V horn
  • New state of the art 3" (76 mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion and extended frequency response
  • 12" woofer with revolutionary Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases force, lowers distortion and provides increased frequency response linearity
  • Proprietary top and side handle designs for simplified handling and carrying, integrates one M10 hang point, OmniMountTM bracket point and four M6 bracket points
  • Ten additional M10 suspension points for flexible rigging and installation options
  • Top hat for pole mounting applications
  • LED indicators for signal present, limiter, thermal condition and power ON status

 

Applications

Designed for the highest quality vocal and full range live performance in medium size applications

  • Suitable for medium to large conference, Theatre and small to medium scale concerts
  • Scalable from stand alone to full range large systems incorporating EX subwoofers
  • Fixed installations
  • Stage monitoring

    KV2 Audio EX12 - Extreme Resolution Active Speaker System

    SKU: GDSKV2EX12
    £3,250.00Price
    • There are lots of powered speakers, but at KV2 Audio building an active speaker goes beyond bolting a Class D amplifier to the back of a box. We work towards creating the best technology in each distinct discipline, and then integrate each step into a powerful package within the context of a truly remarkable audio system. 

      The EX range represents the pinnacle in small format active technology available in the world today. The market has been flooded with active speakers since their popularity flourished in the late nineties. It was indeed KV2’s founder George Krampera that led this revolution with the development of the ART range at RCF. George soon realized the true secret to active loudspeaker design was not just building powered speakers but developing amplifiers that are perfectly matched to the transducers so every component is optimized. 

    • System Acoustic Performance

      Max SPL Long-term 127dB
      Max SPL Peak 130dB
      -3dB Response 55Hz to 22kHz
      -10dB Response 45Hz to 30kHz
      Crossover Point 1.1kHz

      High Frequency Section

      Acoustic Design Horn Loaded
      High Horn Coverage Horizontal / Vertical 80° x 40°
      Rotatable Horn NO
      Throat Exit Diameter / Diaphragm Size 1.4" / 3"
      Diaphragm Material Nitride Titanium
      Magnet Type Neodymium

      High Frequency Amplifier Specification

      Type Class AB Push-Pull
      Rated Continuous Power 50W
      Distortion <0.05%
      Operating Bandwidth 1.1kHz to 30kHz

      Low Frequency Section

      Acoustic Design Front Loaded, Bass Reflex
      Woofer Size / Voice Coil Diameter / Design 12" / 3.0" / Trans Coil
      Magnet Type Neodymium
      Diaphragm Material Epoxy Reinforced Cellulose

      Low Frequency Amplifier Specification

      Type High efficiency, Current-enhancing switch mode
      Rated Continuous Power 450W
      Distortion <0.05%
      Operating Bandwidth 45Hz to 1.1kHz

      Signal Input

      Input Sensitivity 1.0V RMS
      Input Impedance 20 kΩ

      Power Requirements

      Power Connector Neutrik PowerCon®
      Operating Voltage Range 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
      Recommended Amperage 6A 115V | 3A 230V | 3A 250V

      Cabinet

      Cabinet Material Baltic birch
      Handles 2
      Pole Mount 35 mm
      Color "Orange peeled" Matt Black or any RAL

      Physical Dimensions

      Height 596 mm (23.46")
      Width 368 mm (14.49")
      Depth 368 mm (14.49")
      Weight 29 kg (63.8lbs)

    PRICES EXCLUDE VAT

    Product Rating

    Related Products

    We don’t have any products to show right now.

    We don’t have any products to show right now.

    We don’t have any products to show right now.

    We don’t have any products to show right now.

    “By far the best service I’ve ever experienced. I was importing a product to Canada and the whole experience was quick, easy and seamless. These guys really care about running a good business. Not to mention the price was cheaper than the stores here even after importing. Definitely will do more business in the future.” 

    —  Philip Manzon

    google reviews 4.8.png