46-120T 4-Zone 100V Mixer Amp 6-Line/2-Mic I/P 4x120W 2U
Main Features
- The 46-120T 100V Line 4-Zone Integrated Mixer Amplifier
- Provides individual source selection and volume control of up to six audio sources
- Feeds four different output zones with up to 120W of clean audio power
- Can be controlled remotely via the connection of an optional RSL-6 / RSL-6A
- Paging facility is available with the optional PM-Series paging microphones
- Optional interface card (CDI-46) provides a digital paging connection
46-120T 4 Zone Integrated Mixer Amplifier
The 46-120T 4-Zone Integrated Mixer Amplifier provides individual source selection and volume control of up to six audio sources and two microphone inputs across four zones. Each zone is provided with 120W (4ohm) output or 120W (70/100V) output with internal transformer modules pre-installed.
Source selection and volume level control for each zone can be made via the front panel or remotely with the connection of up to four optional RSL-6 / RSL-6A Remote Source / Volume Select controllers, one for each zone. Analogue paging functionality to individual or all zones is available with the optional PM-Series paging microphones.
An automatic stand-by function reduces power consumption when not in use and a remote power down function makes the 46/120T suitable for numerous applications in retail, leisure, education and hospitality. The CDI-46 Optional Digital Interface Module provides digital paging connection via RJ-45, Ethernet Interface (TCP/IP) and RS-232 connection.
The 46/120T Mixer Amplifier provides a feature-packed single-box solution for four zone venues of all sizes.
Cloud - 46-120 - 4 Zone Integrated Mixer Amplifier
Line inputs
- Frequency response: 20 Hz to 20 kHz +0/-0.5 dB
- THD + N: 0.04% @ 1 kHz; 22 kHz bandwidth
- Sensitivity: 195 mV (-12 dBu) to 2.0V (+8 dBu)
- Input Gain control: 20 dB range
- Input impedance: 47 kohms
- Headroom: 17 dB
- Noise: -90 dB rms; 22 kHz bandwidth
- Equalisation: HF:±10 dB @10 kHz; LF:±10dB @ 50 Hz
Microphone inputs
- Frequency response: 100 Hz -3 dB (fixed filter) to 20 kHz ±1 dB
- Distortion: <0.03% @ 1 kHz, 80 kHz bandwidth
- Gain range: 10 dB to 50 dB
- Common Mode Rejection: 70 dB typical
- Input Impedance: 3.3 kohms (balanced)
- Headroom : 17 dB
- Noise: -127 dB EIN 22 Hz - 22 kHz (Rs = 150 ohms)
- Equalisation: HF:±10 dB @ 5 kHz LF:±10 dB @100 Hz
Outputs
- Low Impedance Outputs
- 4 ohm load: 120 W (170 W one channel driven) @ 1 kHz & 0.1% THD+N
- 8 ohm load: 85 W (100 W one channel driven) @ 1 kHz & 0.1%THD+N
- Frequency response: -1 dB @ 20 kHz,-0.5 dB @ 20 kHz
- Distortion: <0.04% @ 1 kHz, 80 kHz bandwidth
- 70/100V-line output*
- Min. load
- 70V balanced – 42 ohm min. load
- 100V balanced – 83 ohm min. load
- Frequency response: -3 dB @ 65 Hz (filter), -2.5 dB @ 20 kHz
- Distortion: <0.06% @ 1 kHz, 80 kHz bandwidth
- Amplifier Protection: Dynamic Clip Protection,VI Limiting, DC Offset,thermal & switch-on delay
- Cooling: Variable speed DC fan (stationary in Idle Mode)
General
- Power input: 230V ±5% (115V ±5% by internal connection)
- Fuse rating: 230V:T4A; 100/115V:T8A
- Fuse type: 20 mm x 5 mm HBC
- Power consumption (For thermal dissipation subtract power in the load)
- External remote power-down: 4.7 W (7.75VA)
- Idle – 4 chs APD: 13.4 W (16.75VA)
- Idle – 3 chs APD: 16.3 W (20.5VA)
- Idle – 2 chs APD: 19.2 W (24.9VA)
- Idle – 1 ch APD: 22.2 W (29.4VA)
- Idle, all chs active 25.2 W (33.6VA)
- Noise input,1/3 rated power,4 ohms: 440 W (560VA)
- Noise input,1/3 rated power,8 ohms: 275 W (362VA)
- Noise input,1/8 rated power,4 ohms: 280 W (370VA)
- Noise input,1/8 rated power,8 ohms: 175 W (240VA)
- Dimensions
- Net: 482.6 mm x 88 mm (2U) x 407 mm / 19” x 3.5” x 16”
- Shipping: 598 mm x 157 mm x 542 mm / 24” x 6” x 21”
- Weights
- Net:
- 46-120/46-120MEDIA: 11.75 kg (26.32 lbs)
- 46-120T/46-120TMEDIA: 15.75 kg (35.28 lbs)
- Shipping:
- 46-120/46-120MEDIA: 13.95 kg (31.25 lbs)
- 46-120T/46-120TMEDIA: 17.95 kg (40.21 lbs)
- Net: